Copyright © 2016 Advanced Modern Technologies Corporation. All rights reserved.
HSM101814U10AJ (1.0 gpf/3.8 Lpf) AUTOMATIC JANITOR SIDE MOUNT TIMER LC QUARTER STALL URINAL FLUSH VALVE SYSTEM
DESCRIPTION Battery Powered, Programmable Timer Operated AUTOMATIC JANITOR Side Mount Complete LC System with Exposed Urinal Flushometer and Vitreous China Fixture.
FLUSH CYCLE Model HSM101814U10AJ (1.0 gpf/3.8 Lpf) Low Consumption
FLUSHOMETER SPECIFICATION (HSM-801AJ-CU-10) - Patented Gear Motor Drive - Provides Significant Water Savings - Keeps Cleaning Pipes and Porcelain When Facility is Closed - Helps to Carry Liquid Waste Required Distance - Easy Programming and Installation - Programmable Settings Allow Flushing Once Every 1, 2, 3, 4, 6, 12, or 24 Hours for Ultimate Water Savings - Works in Conjunction With a Urinal Deodorizer/Screen - Vandal and Water Resistant Design - Chrome Plated Metal Housing - Quiet Operation - Manual Flush Override Option Using Special Key - *Mechanical Override Works When Batteries are Drained - Operates on (4) “C” Alkaline Batteries (Included) - Battery Life - 3+ Years - Beeping “Low Battery” Indicator - Easy Battery Replacement-No Water Shut Off Necessary - Uses Proprietary Silicone Diaphragm with Filtered Bypass - 3/4” I.P.S. Angle Stop - Adjustable Tailpiece - High Back Pressure Vacuum Breaker with Single Piece Hex Coupling Nut - Spud Coupling and Flange for 3/4” Top Spud - Sweat Solder Kit and Wall Flange with Set Screw - Low Consumption For Water Conservation
CODE COMPLIANCE (LISTED BY IAPMO) - ASSE 1037-2015 - ASME A112.1035-2015 - CSA B125.37-15
W a rra nty
5 Years
L iste d
By
I APM O
TECHNICAL DOWNLOADS
Specifications -HSM101814U10AJ
FIXTURE SPECIFICATION (AUU-1018-14) - Complies with ADA Accessible Standards - White Color - Wall Hung Vitreous China - Washout Flushing Action - Elongated Rim - Integral Flushing Rim - Integral Trap - 3/4” (19mm) I.P.S. Top Spud Inlet (Included) - 2” (50mm) NPT Outlet Flange (Included) - 100% Factory Tested - Hanging Bracket (1 included)
CODE COMPLIANCE (LISTED BY ICC-ES) - ASME A112.19.2-2013 - CSA B45.1-13
PLUMBING SYSTEM REQUIREMENTS - Minimum Flowing Pressure: 25 PSI - Maximum Static Pressure: 80 PSI - Minimum Flow Rate: 25 GPM
A D A C om plia nt
The Automatic Janitor is a fully programmable automatic flush control device for urinals. The Automatic Janitor converts most urinals into water efficient fixtures by controlling the amount of daily flushes. The flush intervals can be programmed to flush once every 1, 2, 3, 4, 6, 12, or 24 hours. The Automatic Janitor was designed to be used in conjunction with a urinal deodorizer/screen to provide for ultimate water efficiency while eliminating odors.
The AUTOMATIC JANITOR Advantage
AMTC Advanced Modern Technologies Corporation