HSM101812U05AJ(0.5 gpf/1.9 Lpf) AUTOMATIC JANITOR SIDE MOUNT TIMERHEU HALF STALL URINAL FLUSH VALVE SYSTEM
DESCRIPTIONBattery Powered, Programmable Timer OperatedAUTOMATIC JANITOR Side Mount Complete Ultra HEUSystem with Exposed Urinal Flushometer and Vitreous China Fixture.
FLUSH CYCLEModel HSM101812U05AJ (0.5 gpf/1.9 Lpf) High Efficiency
FLUSHOMETER SPECIFICATION (HSM-801AJ-CU-05)- Patented Gear Motor Drive- Provides Significant Water Savings- Keeps Cleaning Pipes and Porcelain When Facility is Closed- Helps to Carry Liquid Waste Required Distance- Easy Programming and Installation- Programmable Settings Allow Flushing Once Every 1, 2, 3, 4, 6, 12, or 24 Hours for Ultimate Water Savings- Works in Conjunction With a Urinal Deodorizer/Screen- Vandal and Water Resistant Design- Chrome Plated Metal Housing- Quiet Operation- Manual Flush Override Option Using Special Key- *Mechanical Override Works When Batteries are Drained- Operates on (4) “C” Alkaline Batteries (Included)- Battery Life - 3+ Years- Beeping “Low Battery” Indicator - Easy Battery Replacement-No Water Shut Off Necessary- Uses Proprietary Silicone Diaphragm with Filtered Bypass- 3/4” I.P.S. Angle Stop- Adjustable Tailpiece- High Back Pressure Vacuum Breaker with Single Piece Hex Coupling Nut- Spud Coupling and Flange for 3/4” Top Spud - Sweat Solder Kit and Wall Flange with Set Screw- High Efficiency For Water Conservation
PLUMBING SYSTEM REQUIREMENTS- Minimum Flowing Pressure: 25 PSI- Maximum Static Pressure: 80 PSI- Minimum Flow Rate: 25 GPM
The Automatic Janitor is a fully programmable automatic flushcontrol device for urinals. The Automatic Janitor converts mosturinals into water efficient fixtures by controlling the amount ofdaily flushes. The flush intervals can be programmed to flushonce every 1, 2, 3, 4, 6, 12, or 24 hours. The Automatic Janitorwas designed to be used in conjunction with a urinaldeodorizer/screen to provide for ultimate water efficiency whileeliminating odors.