AEFHW1012T16DF(1.6 gpf/6.0 Lpf and 1.1 gpf/4.2 Lpf) DUAL-FLUSHFLOOR MOUNT HET HARDWIRED AUTOMATIC FLUSH VALVE SYSTEM
DESCRIPTIONHardwired, Sensor Operated HYBRIDFLUSH® Top MountComplete DUAL-FLUSH System with Exposed AutomaticWater Closet Flushometer and Vitreous China Fixture.
FLUSH CYCLESModel AEFHW1012T16DF (1.6 gpf/6.0 Lpf and 1.1gpf/4.2Lpf) High Efficiency
FLUSHOMETER SPECIFICATION (AEF-801DF-HWCT-16)- User present for less than 60 seconds initiates a reduced flush (1.1 gpf/4.2 Lpf) eliminating liquid and paper waste- User present for more than 60 seconds initiates a full flush (1.6 gpf/6.0 Lpf) eliminating solid and paper waste- Reduced flush consumes up to 30% less water- Patented BRV® and Gear Motor Drive- Hands Free Infrared Sensor Activation- Vandal and Water Resistant Design- Chrome Plated All Metal Housing- Quiet Operation- True Mechanical Override (Side) *Mechanical Button/Handle Works When Electrical Power is Out- Operates on 6-Volt DC Power (Transformer Sold Separately)- Adjustable Sensor Angle- Adjustable Sensor Distance- Optional Three (3) Second Flush Delay Mode- Optional 24-Hour Flush Mode- Uses Proprietary Silicone Diaphragm with Filtered Bypass- 1” I.P.S. Angle Stop - Adjustable Tailpiece- High Back Pressure Vacuum Breaker with Single Piece Hex Coupling Nut- Spud Coupling and Flange for 1 ½” Top Spud - Sweat Solder Kit and Wall Flange with Set Screw- High Efficiency For Water Conservation
FIXTURE SPECIFICATION (AUT-1012)- White Color - Vitreous China- Floor Mount Water Closet Bowl- Elongated Rim- 10” (254mm) Rough-In- 1-1/2” (38mm) I.P.S. Top Spud Inlet- 2” (50mm) Fully Glazed Trapway- 11” (279mm) x 13” (330mm) Water Surface Area- Direct Feed Jet- 100% Factory Tested- Toilet Seat Not Included
CODE COMPLIANCE (LISTED BY ICC-ES)- ASME A112.19.2-2013- CSA B45.1-13
PLUMBING SYSTEM REQUIREMENTS- Minimum Flowing Pressure: 25 PSI- Maximum Static Pressure: 80 PSI- Minimum Flow Rate: 25 GPM